Click image to view full size image
Plastic injection molding screw and barrel
1.size:
- screw diameter:Φ20-Φ500mm
- Maximum screw length:10000mm
- Barrel inner bore diameter:Φ500mm
2.Technology:nitriding treatment ,alloy coating spraying, heat-treatment applied
3. Technical parameter:
Material | 38CrMoAIA,42CrMo,alloy powder |
Nitride depth | 0.7mm |
Surface hardness | HV950 - HV1,020 |
Fragility of nitrition | less than grade 1 |
Screw straight tolerance | 0.015 mm/m |
Surface roughness | Ra 0.4μm |
Linearity of the screw | 0.015mm |
Depth of double alloys | > 2ram |
Bimetallic layer depth | 3mm |
We can manufacture all types of screws and barrels according to clients' requirement.
Plastic injection molding screw and barrel
